Pister logo

Pister quick coupling system PMK

The Pister quick coupling system PMK is a mechanical quick coupling system to connect and disconnect hydraulic lines between construction machinery and attachments

The system was especially designed for use at construction machinery . It can be used for quick tool exchange but also for boom separation at large demolition excavators

With the system up to four hydraulic circuits can be coupled simultaneously to connect any tool to the construction machine in no time. Without leakage and under any residual pressure in the attachment.

The system can be used with hammers and all kind of demolition tools without any limits. Available from
nominal size ten to 25.

Fast tool exchange will increase the efficiency of the machine, reduces idle mode for tool exchange, and wearout costs due to more regular tool exchanges

 

Features:

• Self locking in coupled position
• From nominal size DN20 and above with locking device to avoid opening when line is pressurized
• Machine side : plugs tool side : female couplings
• Couplings with different nominal sizes in one multicoupling
possible
• Individual configuration of tool plates according to attachment requirements . Dummies to protect empty lines
• Knee lever mechanism for optimal force deflexion characteristics
• Anti twist safeguard to increase the lifespan of couplings
• Robust by use of hardened steel
• Zinc nickel coating

 

Benefits

+ Additional runtime for construction machinery increase efficiency
+ Lower maintenance costs due to lesser replacement parts and
therefore additional time savings due to lesser repairs
+ No oil leakage and possibilty to work in sensitive areas such as
gardening and landscape works
+ Low additional weight on the boom increase machine
performance and saves fuel compared to fully automated systems
+ No danger of confusion between hydraulic lines
+ Installation sideways on the boom reduces dirt impact
+ Unlimited use of any demolition tools and hydraulic hammers
+ Extremely flat and compact design reduces the risk of damage
+ Easy and fast installation especially with adapter plates
+ Only two sizes for machines up to 45 tons . maximum
compatibility
+ Existing tools can be easily adapted at a fair price
+ Screw adapters allow use of rental tools

PMK10
PMK 13
PMK Pikaliitin
PMK 20
PMK-20
PMK-25

PMK-10 series

available as a single or double system

Tonnage class: 1-3t
Flow rate: 50-75l/min. at 3/5bar pressure loss
Operating pressure: 330 bar
Coupling type: 1

For mini and small compact excavators

PMK-13 series

available as a single, double or triple system

Tonnage class: 2-9t
Volume flow: 90-125l/min. at 3/5bar pressure loss
Operating pressure: 330 bar
Coupling type: 1

For compact excavators

PMK-20 series

available as a single, double or triple system

Tonnage class: 10-40t
Volume flow: 280-380l/min. at 3/5bar pressure loss
Operating pressure: 450 bar
Coupling type: 2

For tracked and wheeled excavators
 

Wheel loaders and special machines

available as a double system

Tonnage class: up to 25t
Volume flow: 170-200 l / min. at 3 / 5bar pressure loss
Operating pressure: 330 bar
Coupling type: 1

For large wheel loaders. Smaller wheel loaders can be equipped with the PMK-13 series.

Material handling machines

available as a quadruble system

Tonnage class: up to approx. 90t
Volume flow: 280-380 l / min. at 3 / 5bar pressure loss
Operating pressure: 450 bar
Coupling type: 2
 
For material handling machines with four hydraulic lines next to each other

PMK-25 series

available as a double system

Tonnage class: from 30t
Flow rate: 650-800/min. at 3/5bar pressure loss
Operating pressure: 375 bar
Coupling type: 2

For demolition machines for boom separation and tool exchange